High Drilling Efficiency 75mm Core Geotechincal Water Well Drilling Rig Machine With 200 Meters Depth
GK 200 Water Well Drilling Rig Machine Introduction
GK200 Portable Diesel Water Well Digging Machine has 8 postive rotation gear,high speed,strong torque,widely scope of applicationThe rig is equipped with an upper spherical jaw holding mechanism and hexagonal drive drilling rod which can be replaced without shutdown lever is efficient and easy to operate, safe and reliable..
GK 200 Water Well Drilling Rig Machine Main Parameter
| Unity machine parameter |
| Drilling depth | 600m |
| Open hole caliber | 300mm |
| End hole caliber | 75mm |
| Drilling angle | 90°~65° |
| Drill weight (No include power) | 1750kg(Electric Machinery) 1830kg(Diesel Engine) |
| Unity machine dimensions | 2220*900*1800mm |
| Distance away from hole | 280mm |
| Spindle |
| Speed |
| Forward | 57 99 157 270 470 742 1024 |
| Reverse | 45 212 |
| Stroke | 560mm |
| Spindle inner diameter | 96mm |
| Spindle lifting capacity | 6000kg |
| hoist |
| Reel caliber | 200mm |
| Hug floodgate belt width | 90mm |
| Tightrope caliber | 12.5mm or 14mm |
| Rell cubic measure | 30m |
| Single line lifting speed | 0.515 0.894 1.421 1.948m/s |
| Max single line hoisting capacity | 3000kg |
| Oil pump |
| F532/F314 | Duplex gear oil pump |
| Displacement | front 32L/min pressure 20Mpa |
| behind | 14L/min pressure 20Mpa |
| Power |
| Diesel engine | 395Kz 27HP |
| Electric motor | Y180L-4 22kw |
GK 200 Water Well Drilling Rig Machine Application
(1) It is mainly used for the general survey and engineering geological investigation of solid ore deposits, as well as the inspection holes for various concrete structures.
(2) The alloy can be selected according to different strata. Drill with composite chip and diamond bit.
(3) The rated drilling depth is 150m, the depth shall not exceed 180, the rated opening diameter is 110mm, the allowable opening diameter is 150mm, and the final hole diameter is 75mm.
Instructions for use of drilling and coring machine:
1) To ensure safe and normal operation, read the instructions before use, and get familiar with the structure and use of the drill. 2) After the drilling rig moves to the position where it needs to work, swing the traveling wheel 180 degrees backward, and operate the handle to make the traveling wheel and the steering wheel leave the ground. Adjust the four adjusting bolts to make the base firmly on the working position. At this time, the base plane is off the ground. 3) Wipe the drill column and lifting screw, and adjust the spindle position. 4) Connect the water pump to the water source and add water to the bucket to ensure that the water pump can supply water normally. 5) Install the upper drill bit. 6) Check and adjust all parts of the engine according to the requirements of the gasoline engine operation manual. If the engine is in normal condition, the engine can be started. Start drilling and coring.
Product Tags:
|
|
High Drilling Efficiency 75mm Core Geotechincal Water Well Drilling Rig Machine With 200 Meters Depth Images
|
